Anti-Slip Flooring

Hard Wearing Anti-Slip Epoxy Resin Floor Screed.

Topcoat Anti-Slip Flooring system is a hard-wearing anti-slip Epoxy resin floor screed suitable for use in wet areas. It is seamless, easy to clean and comes in a large range of colours.

The Anti-Slip Flooring system consists of four steps:

  • The concrete subfloor is prepared by dust-free shot blasting or diamond grinding.
  • Epoxy high penetration Primer 2000 is applied.
  • While the primer is still wet the surface is blinded with Quartz aggregate size.
    0.1 – 0.3 mm for light anti-slip.
    0.3 – 0.6 mm for medium anti-slip.
    0.4 – 0.8 mm is used for heavy-duty applications such as carpark ramps.
  • Epoxy screed Topcoat 2000 is applied using a squeegee followed by back rolling.

Applications

Carparks, Fire stations, Workshops, Processing areas, Corridors, Laboratory areas, Warehouses etc.

Screed Colours

Battleship Grey (dark Grey), Gunmetal Grey (light Grey). Leaf Green, Marine Blue, Sky Blue, Honey Yellow, Sand Yellow, Tomato Red, Tile Red.

Substrate Requirements

Concrete or substrate should be a minimum of 25N/mm2, free from laitance, dust, and other contamination. The substrate should be dry to 75% RH as per BS 8204 and free from rising damp and groundwater pressure. If no damp proof membrane is present D-Proof DPM can be used.

Conforms to EN 13813:2002. Conforms to British Slip Resistance Standard No. BS7976-2:2002 under both wet and dry conditions.

Anti-Slip Flooring Gallery