A Few Tips
- Never polish or emulsion seal resin flooring unless there is a special reason for it.
- Use only recommended cleaning liquids or their equivalent. Do not mix cleaning liquids together and do not use cleaning liquids at greater concentrations than the manufacturer recommends.
- Remove any rubber heel marks by abrasion with a polypropylene pad (using scouring powder if necessary).
How To Clean: Machine
- Vacuum up dust and other debris.
- Apply a low foam neutral cleaner and leave for several minutes.
- Machine scrub using polypropylene brushes.
- Wet vacuum residue.
- Rinse with warm, clean water.
- Wet vacuum.
Do remember that dirty equipment, particularly mops, does not clean – it merely redistributes the dirt. Machine scrubbing is the preferred method. Use polypropylene brushes – NEVER USE NYLON PADS. Remove any grease or oil spillage before main cleaning cycle starts. Wipe up spillages immediately.
How To Clean: Manual
- Sweep up dust and other debris.
- Apply low foam neutral cleaner and leave for several minutes.
- Scrub with deck scrubber or edge cleaner using polypropylene brushes. Use mops only on smooth floor finishes.
- Wet vacuum residue OR on smooth floors only, mop up residue using
twin compartment mop buckets. - Rinse with warm, clean water.
- Wet vacuum.